6.9: The Magnetic Field H
- Page ID
- 5745
If you look at the various formulas for the magnetic field \(B\) near various geometries of conductor, such as equations 6.5.3, 6.6.2, 6.7.1, 6.8.4, you will see that there is always a \(\mu\) on the right hand side. It is often convenient to define a quantity \(H = B/\mu \). Then these equations become just
\[H=\frac{I}{2\pi a},\]
\[H=\frac{I}{2a},\]
\[H=\frac{NIa^2}{2}\left ( \frac{1}{[a^2 + (c-x)^2]^{3/2}}+\frac{1}{[a^2+(c+x)^2]^{3/2}}\right ) ,\]
\[H=nI . \]
It is easily seen from any of these equations that the SI units of \(H\)are \(\text{A m}^{-1}\), or amps per metre, and the dimensions are \(\text{QT}^{-1}\text{M}^{-1}\).
Of course the magnetic field, whether represented by the quantity \(B\) or by \(H\), is a vector quantity, and the relation between the two representations can be written
\[\textbf{B}=\mu \textbf{H}.\]
In an isotropic medium \(\textbf{B}\) and \(\textbf{H}\) are parallel, but in an anisotropic medium they are not parallel (except in the directions of the eigenvectors of the permeability tensor), and permeability is a tensor. This was discussed in section 1.7.1 with respect to the equation \(\textbf{D}=\epsilon \textbf{E}\).