# 7: Time

In this chapter we briefly discuss the several time scales that are in use in astronomy, such as Universal Time, Mean Solar Time, Ephemeris Time, Terrestrial Dynamical Time, and the several types of second, hour, day and year that are or have been in use. For some topics it will be assumed that the reader has read the relevant portions of Chapter 6 in order to have a fuller understanding. Some of the items in this chapter will be given only in short note form or single sentence definitions, particularly where they have already been discussed in Chapter 6. Others will require a bit more discussion.

The *Local Apparent Solar Time* at a particular geographical longitude is the hour angle of the Apparent Sun plus 12 hours. It is the time indicated by a sundial. Because the right ascension of the Apparent Sun does not increase uniformly during the year, local apparent solar time does not proceed at a uniform rate. (What is meant by “time proceeding at a uniform rate” is something that can be pondered about. One might indeed ponder for a long time.)

The *Local Mean Solar Time* at a particular longitude is the hour angle of the Mean Sun plus 12 hours. Although, like local apparent solar time, it is local to a particular longitude, it does, at least in some sense, flow uniformly, inasmuch as the right ascension of the Mean Sun increases uniformly. If the reader is wondering whether the sentence “mean solar time flows uniformly because the right ascension of the Mean Sun increases uniformly” is circular logic, and that either part of the sentence follows from the definition of the other, he or she is not alone. Indeed, defining exactly what is meant by “uniformly flowing time” is not easy; I am not sure if anyone has ever fully successfully managed it.

The *Equation of Time* is the difference between Local Apparent Solar Time and Local Mean Solar Time. Whether it is \(\text{LAMS}\) − \(\text{LMST}\) or \(\text{LMST}\) − \(\text{LAMS}\) varies from author to author. Thus, whenever you use the phrase in your own writing, be careful to define which sense you intend.

*Greenwich Mean Time* is the Local Mean Time at the longitude of Greenwich. In a general sense it is the same thing as Universal Time. However, there are some slight refinements of Universal Time of which we should be aware, and which will be discussed later.

*Zone Time*. Since Local Mean Solar Time is essentially local – i.e. it varies from longitude to longitude − it has been decided, for civil timekeeping purposes, to divide the world into a number of longitude zones approximately 15 degrees (one hour) wide, in which everyone agrees to keep the same time, namely the local mean solar time for a particular longitude within the zone. Here, where I write in Victoria, British Columbia, Canada, within our zone we use Pacific Standard Time during the winter months. This is eight hours behind Greenwich Mean Time. Many jurisdictions advance their zone time by one hour during the summer months; thus in the summer here in Victoria, we use Pacific Daylight-saving Time, which is just seven hours behind Greenwich Mean Time. It needs to be remembered that, to change from the Standard time for a given zone to Daylight-saving time, clocks are advanced by one hour in spring, and that “spring” occurs six months apart in the northern and southern hemispheres! The standard zone time for Sydney, Australia, is 18 hours ahead of the standard time for Victoria, Canada. But in December, it is summer in Australia and winter in Victoria; Sydney is then on Daylight-saving Time while Victoria is on Pacific Standard Time – a difference of 19 hours. In June, Victoria is on Daylight-saving Time while Australia is on Standard Time, a difference of 17 hours. These complications have to be understood by those who are planning international telephone calls!

*Local Sidereal Time* is the hour angle of the First Point of Aries, and is equal to the hour angle plus right ascension of any star.

A *Mean Solar Day* is the interval between two consecutive upper meridian transits of the Mean Sun.

A *Mean Sidereal Day* is the interval between two consecutive upper meridian transits of the mean equinox. It is equal to \(23^\text{h} \ 56^\text{m} \ 04^\text{s} .091\) of mean solar time. The rotation period of Earth relative to the fixed stars is \(23^\text{h} \ 56^\text{m} \ 04^\text{s} .099\) of mean solar time. Transits of \(\Upsilon\) are slightly closer together because of the westward precessional motion of \(\Upsilon\) along the ecliptic.

A *Sidereal Year* is the period of revolution of Earth around the Sun relative to the fixed stars, and it is \(365^\text{d} .25636\), where “\(\text{d}\)” denotes “mean solar days”.

A *Mean Tropical Year* is the mean time required for the Apparent Sun to increase its ecliptic longitude by \(360^\circ\). It is the interval that determines the seasons and is equal to \(365^\text{d} .24219\). It is less that a sidereal year because of the westward motion of \(\Upsilon\) along the ecliptic.

An *Anomalistic Year* is the interval between two consecutive passages of Earth through perihelion. It is equal to \(365^\text{d} .25964\). It is longer that the sidereal year because of the forward motion of perihelion.

In days gone by, when life was simpler, a *second* was merely the fraction \(1/86400\) of a mean solar day. As time-keeping became more and more precise, it became evident not only that time could be measured more precisely in the laboratory with atomic clocks than the rotation of Earth could be measured, but that Earth itself was not a perfect timekeeper, because it does not rotate uniformly when measured with an atomic clock. This is presumably because of unpredictable changes within the body of Earth which change its rotational inertia. This again raises the question of what is meant by “uniformly flowing time”. Whatever is meant by it, atomic time is presumed to be a better representation of it than an irregularly rotating Earth.

At present, the \(\text{SI}\) (Système International) definition of the second is the interval of \(9192 \ 631 \ 770\) periods of the radiation corresponding to the transition between the hyperfine levels \(F = 0\) and \(F = 1\) of the ground level \(^2 \text{S}_{1/2}\) of the caesium isotope \(^{137}\text{Cs}\). While it can easily be argued that this definition of the second is superior in numerous respects to the definition based on the rotation of Earth, it must be noticed that this definition is useful (albeit *very* useful) only for determining *intervals of time* – i.e. how many seconds have elapsed between event A and event B. By itself, the definition does nothing to determine the *instant of time* of a single event. It tells us nothing about how far Earth has rotated on its axis (time of day) or how far it has moved in its orbit around the Sun (time of year). There is still a need for a time scale for determining the instant of time of astronomical events and to use as a “uniformly-flowing” time as argument in celestial mechanical calculations and the provision of ephemerides.

*International Atomic Time* (TAI – from the initial letters of the French name, *Temps Atomique International*) does enable us to define an instant of the time of occurrence of an event, since it is defined by the “ticking” of a caesium atomic clock beating out SI seconds of atomic time, which started at the beginning of the day 1958 January 01. That is, it has a unit of time and a starting point. Many seconds have elapsed since that epoch, however, so you can compare it with the “time of day” or with Greenwich Mean Time, by subtracting 86400 seconds whenever the number of seconds exceeds this number. That is, \(\text{TAI}\) is the number of seconds that have elapsed since the initial epoch, “modulo 86400”. This will not agree exactly with Greenwich Mean Time (i.e. the hour angle of the Mean Sun at Greenwich plus 12 hours) unless Earth rotates uniformly when compared with an atomic clock. It does not, quite, so one may ask which clock is “at fault”, or which clock is “running uniformly”. Most of us will probably agree that it is the atomic clock that is running uniformly and that the difference between \(\text{TAI}\) and \(\text{GMT}\) is caused by irregularities in the rate of rotation of Earth relative to \(\text{TAI}\). Thus we may be tempted, for many purposes, to prefer to measure time interval with an atomic clock than to use the rotation of Earth as our time keeper. This is valid indeed, if all we want to do is to measure the interval of time between two events – but it still does not tell us where the Sun (whether Mean or Apparent) is in the sky, and we still need a time scale, whether it is uniform or not, that tells us the hour angle of the Sun.

The required time scale is *Universal Time*, which is the hour angle of the Mean Sun at Greenwich plus 12 hours, and is, for most purposes, the same as Greenwich Mean Time. However, for very precise work, there are several subtly-different varieties of Universal Time. In principle, we could determine \(\text{UT}\) by measuring the hour angle of the Mean Sun – if only we could see the Mean Sun and record exactly when it crosses the meridian. In practice, \(\text{UT}\) is determined by recording the transit times of stars, and calculating the Universal Time from the observed Local Sidereal Time. If you do this, you get what is known as \(\text{UT0}\). However, small corrections are necessary to account for *variation of latitude*(see section 6.7) and *polar motion* (slippage of Earth’s crust with respect to the body of the planet), and when these corrections are made, we arrive at \(\text{UT1}\). These corrections are not sufficient, however, to keep Universal Time always in exact agreement with \(\text{TAI}\), and whenever \(\text{UT1}\) differs from \(\text{TAI}\) by as much as 0.9 seconds, a *leap second* is added to (or in principle, if not in practice, subtracted from) \(\text{UT1}\) to arrive at *Coordinated Universal Time* \(\text{UTC}\), which thus never differs from \(\text{TAI}\) by as much as a second. Leap seconds are typically added at the end of a year, or sometimes in mid-year. The time signals broadcast by radio and over the Internet are \(\text{UTC}\), and announcements are made whenever a leap second is inserted. Whenever a leap second is inserted, the minute during which it is inserted has 61 seconds, and an announcement is made. Normally the instant of time at which astronomical events are observed (such as lunar occultations) should be recorded and reported in \(\text{UTC}\). Of course, if the observation is not made with a precision of better than a second (e.g. the commencement of a lunar eclipse), one should not pretend that one can distinguish between the various versions of \(\text{UT}\), and the time recorded should be “\(\text{UT}\)”. To say “\(\text{UTC}\)” under such circumstances is to pretend to a greater precision than was actually achieved – rather like quoting a measurement to too many significant figures.

While Universal Time tells us the “time of day” – i.e. how far Earth has rotated on its axis – it is not the argument of time needed in the theoretical calculation of orbital ephemerides. For much of the twentieth century, the time scale used for theoretical ephemeris calculations was *Ephemeris Time*, \(\text{ET}\). ( I believe a movie was made about Ephemeris Time. At least the title of the movie was *ET*, so I presume that’s what it was about, though I haven’t actually seen it.) Ephemeris time was based not on the (irregularly rotating) Earth, but in principle on the motion of Earth in its orbit around the Sun, which was presumed to be “uniform”. (In practice, \(\text{ET}\) was calculated from observations of occultations of stars by the Moon, the motion of the Moon in its orbit being supposed to be calculated using a uniformly-flowing Ephemeris Time.) Just as \(\text{TAI}\) has a unit of time (the \(\text{SI}\) second) and an initial epoch (1958 January 01), so ET had a unit of time (the mean tropical year) and an initial epoch (1900 January \(0^\text{d} \ 12^\text{h} \ \text{ET}\)).

While \(\text{ET}\) was much more satisfactory as the “uniformly-flowing” argument of time necessary for ephemeris or other celestial mechanical calculations, it eventually had to be admitted that intervals of *atomic* time could be determined much more precisely than on any other time scale, and consequently ephemeris time (\(\text{ET}\)) was replaced in 1984 by Terrestrial Dynamical Time (\(\text{TDT}\)) as the independent argument of supposedly uniformly-flowing time for ephemeris calculations. Unlike \(\text{ET}\), the unit of time is not the mean tropical year but it is the \(\text{SI}\) second of time based on the hyperfine transition of caesium as defined earlier in the chapter. And the starting point for \(\text{TDT}\) is defined such that at the instant 1977 January \(01^\text{d} \ 00^\text{h} \ 00^\text{m} \ 00^\text{s}\) \(\text{TAI}\) was the same instant as 1977 January \(01^\text{d} .0003725\). Since \(0^\text{d} .0003725\) is \(32^\text{s} .184\), \(\text{TDT}\) is equal to \(\text{TAI}\) plus \(32^\text{s} .184\). This was re-named simply Terrestrial Time (\(\text{TT}\)) in 1991. Like \(\text{TDT}\), \(\text{TT}\) was ahead of \(\text{TAI}\) by \(0^\text{d} .003725\) at 1997 January \(01^\text{d} .0\) \(\text{TAI}\), the difference being that the unit of time interval in \(\text{TT}\) was defined in 1991 as the \(\text{SI}\) second at mean sea level. (At mean sea level? What has that got to do with it?! Not very much, to be sure, but, for precise timekeeping, it is important because, according to general relativity, the rate of passage of time depends on the gravitational potential.)

In summary, the time signals that are broadcast on short-wave radio or on the Internet are \(\text{UTC}\). When you make an observation and record the instant of occurrence of an astronomical phenomenon, you must report the observation in UTC, without converting it to some other scale. The only proviso is that, if your observation is less precise than a second, you should not pretend to greater precision that is warranted by your observation (i.e. you should not pretend that your timing was sufficiently precise that you could distinguish between the various varieties of \(\text{UT}\)), and it then becomes appropriate to report your observation merely as “\(\text{UT}\)”.

If you are calculating and publishing an ephemeris, the argument of time that you should use in your calculations and which should be published in the ephemeris is \(\text{TDT}\). This also applies if you are calculating orbital elements, except that the computer (by which I mean the human being who is doing the calculation or programming a machine to do it) must be aware and cognizant of the fact that the observations that are presented to him or her are given in \(\text{UTC}\), and corrections must be made accordingly.

How great is the difference between \(\text{UTC}\) and \(\text{TDT}\)? This is given by two quantities, known as \(∆T\) and \(∆\text{UT1}\), given by

\[∆T = \text{TDT} - \text{UT1}\]

and \[∆\text{UT1} = \text{UT1} - \text{UTC},\]

from which it follows that

\[\text{TDT} - \text{UTC} = ∆T + ∆\text{UT1, which is also given the symbol } ∆\text{TT}.\]

The values of these corrections are published in *The Astronomical Ephemeris*. They cannot be predicted exactly for a given future year, and their exact values are known only a few years after publication. *The Astronomical Ephemeris* gives a table of \(∆Τ\) since 1620, and a prediction of its value for the current year. In 2000, it was about 63 seconds and increasing at about three-quarters of a second per year.

For most purposes the difference between the \(\text{UTC}\) used by observers and the \(\text{TDT}\) used by computers is of little import. After all, from the practical point of view the right ascension and declination of a planet do not change by very much in 63 seconds. An exception may be in the case of a fast-moving near-Earth asteroid. For example, if an asteroid is moving at the very fast rate of 10000 arcseconds per hour, in 63 seconds it will have moved three arcminutes. In principle, an asteroid observer who is “lying in wait” to “ambush” a new asteroid as it “swims into his view” would have to take into account the difference between the \(\text{TDT}\) of the published ephemeris and the \(\text{UTC}\) of his clock. In practice, the uncertainties in the elements of a newly-discovered fast-moving asteroid present the observer with more challenges than the challenge of \(∆T\), so that, even in the case of fast-moving asteroids, it is seldom that the \(∆T\) is the most important difficulty.