Skip to main content
Physics LibreTexts

7.6: Conservation of Energy

  • Page ID
    1523
  • Energy, as we have noted, is conserved, making it one of the most important physical quantities in nature. The law of conservation of energy can be stated as follows:

    We have explored some forms of energy and some ways it can be transferred from one system to another. This exploration led to the definition of two major types of energy—mechanical energy \((KE + PE)\) and energy transferred via work done by nonconservative forces \((W_{nc})\) But energy takes many other forms, manifesting itself in many different ways, and we need to be able to deal with all of these before we can write an equation for the above general statement of the conservation of energy.

    Other Forms of Energy than Mechanical Energy

    At this point, we deal with all other forms of energy by lumping them into a single group called other energy \((OE)\) Then we can state the conservation of energy in equation form as

    \[KE_i + PE_i + W_{nc} + OE_i = KE_f + PE_f + OE_f .\]

    All types of energy and work can be included in this very general statement of conservation of energy. Kinetic energy is \(KE\), work done by a conservative force is represented by \(PE\), work done by nonconservative forces is \(W_{nc}\) and all other energies are included as \(OE\). This equation applies to all previous examples; in those situations \(OE\) was constant, and so it subtracted out and was not directly considered.

    Usefulness of the Energy Conservation Principle

    The fact that energy is conserved and has many forms makes it very important. You will find that energy is discussed in many contexts, because it is involved in all processes. It will also become apparent that many situations are best understood in terms of energy and that problems are often most easily conceptualized and solved by considering energy.

    When does \(OE\) play a role? One example occurs when a person eats. Food is oxidized with the release of carbon dioxide, water, and energy. Some of this chemical energy is converted to kinetic energy when the person moves, to potential energy when the person changes altitude, and to thermal energy (another form of \(OE\)).

    Some of the Many Forms of Energy

    What are some other forms of energy? You can probably name a number of forms of energy not yet discussed. Many of these will be covered in later chapters, but let us detail a few here. Electrical energy is a common form that is converted to many other forms and does work in a wide range of practical situations. Fuels, such as gasoline and food, carry chemical energy that can be transferred to a system through oxidation. Chemical fuel can also produce electrical energy, such as in batteries. Batteries can in turn produce light, which is a very pure form of energy. Most energy sources on Earth are in fact stored energy from the energy we receive from the Sun. We sometimes refer to this as radiant energy, or electromagnetic radiation, which includes visible light, infrared, and ultraviolet radiation. Nuclear energy comes from processes that convert measurable amounts of mass into energy. Nuclear energy is transformed into the energy of sunlight, into electrical energy in power plants, and into the energy of the heat transfer and blast in weapons. Atoms and molecules inside all objects are in random motion. This internal mechanical energy from the random motions is called thermal energy, because it is related to the temperature of the object. These and all other forms of energy can be converted into one another and can do work.

    Table gives the amount of energy stored, used, or released from various objects and in various phenomena. The range of energies and the variety of types and situations is impressive.

    Problem-Solving Strategies for Energy

    You will find the following problem-solving strategies useful whenever you deal with energy. The strategies help in organizing and reinforcing energy concepts. In fact, they are used in the examples presented in this chapter. The familiar general problem-solving strategies presented earlier—involving identifying physical principles, knowns, and unknowns, checking units, and so on —continue to be relevant here.

    Step 1. Determine the system of interest and identify what information is given and what quantity is to be calculated. A sketch will help.

    Step 2. Examine all the forces involved and determine whether you know or are given the potential energy from the work done by the forces. Then use step 3 or step 4.

    Step 3. If you know the potential energies for the forces that enter into the problem, then forces are all conservative, and you can apply conservation of mechanical energy simply in terms of potential and kinetic energy. The equation expressing conservation of energy is

    \[KE_i + PE_i = KE_f + PE_f.\]

    Step 4. If you know the potential energy for only some of the forces, possibly because some of them are nonconservative and do not have a potential energy, or if there are other energies that are not easily treated in terms of force and work, then the conservation of energy law in its most general form must be used.

    \[KE_i + PE_i + W_{nc} + OE_i = KE_f + PE_f + OE_f.\]

    In most problems, one or more of the terms is zero, simplifying its solution. Do not calculate \(W_c\), the work done by conservative forces; it is already incorporated in the \(PE\) terms.

    Step 5. You have already identified the types of work and energy involved (in step 2). Before solving for the unknown, eliminate terms wherever possible to simplify the algebra. For example, choose \(h = 0\) at either the initial or final point, so that \(PE_g\) is zero there. Then solve for the unknown in the customary manner.

    Step 6. Check the answer to see if it is reasonable. Once you have solved a problem, reexamine the forms of work and energy to see if you have set up the conservation of energy equation correctly. For example, work done against friction should be negative, potential energy at the bottom of a hill should be less than that at the top, and so on. Also check to see that the numerical value obtained is reasonable. For example, the final speed of a skateboarder who coasts down a 3-m-high ramp could reasonably be 20 km/h, but not 80 km/h.

    Transformation of Energy

    The transformation of energy from one form into others is happening all the time. The chemical energy in food is converted into thermal energy through metabolism; light energy is converted into chemical energy through photosynthesis. In a larger example, the chemical energy contained in coal is converted into thermal energy as it burns to turn water into steam in a boiler. This thermal energy in the steam in turn is converted to mechanical energy as it spins a turbine, which is connected to a generator to produce electrical energy. (In all of these examples, not all of the initial energy is converted into the forms mentioned. This important point is discussed later in this section.)

    Another example of energy conversion occurs in a solar cell. Sunlight impinging on a solar cell (Figure 7.7.1) produces electricity, which in turn can be used to run an electric motor. Energy is converted from the primary source of solar energy into electrical energy and then into mechanical energy.

    download.png

    Figure \(\PageIndex{1}\): Solar energy is converted into electrical energy by solar cells, which is used to run a motor in this solar-power aircraft. (credit: NASA)

    Object/phenomenon Energy in joules
    Big Bang \(10^{68}\)
    Energy released in a supernova \(10^{44}\)
    Fusion of all the hydrogen in Earth’s oceans \(10^{34}\)
    Annual world energy use \(4 \times 10^{20}\)
    Large fusion bomb (9 megaton) \(3.8 \times 10^{16}\)
    1 kg hydrogen (fusion to helium) \(6.4 \times 10^{14}\)
    1 kg uranium (nuclear fission) \(8.0 \times 10^{13}\)
    Hiroshima-size fission bomb (10 kiloton) \(4.2 \times 10^{13}\)
    90,000-ton aircraft carrier at 30 knots \(1.1 \times 10^{10}\)
    1 barrel crude oil \(5.9 \times 10^9\)
    1 ton TNT \(4.2 \times 10^9\)
    1 gallon of gasoline \(1.2 \times 10^8\)
    Daily home electricity use (developed countries) \(7n\times 10^7\)
    Daily adult food intake (recommended) \(1.2 \times 10^7\)
    1000-kg car at 90 km/h \(3.1 \times 10^5\)
    1 g fat (9.3 kcal) \(3.9 \times 10^4\)
    ATP hydrolysis reaction \(3.2 \times 10^4\)
    1 g carbohydrate (4.1 kcal) \(1.7 \times 10^4\)
    1 g protein (4.1 kcal) \(1.7 \times 10^4\)
    Tennis ball at 100 km/h \(22\)
    Mosquito (10–2g at 0.5 m/s) \(1.3 \times 10^{-6}\)
    Single electron in a TV tube beam \(4.0 \times 10^{-15}\)
    Energy to break one DNA strand \(4.0 \times 10^{-19}\)

    Efficiency

    Even though energy is conserved in an energy conversion process, the output of useful energy or work will be less than the energy input. The efficiency \(E_{ff}\) of an energy conversion process is defined as

    \[Efficiency \space (E_{ff}) = \dfrac{useful \space energy \space or \space work \space output}{total \space energy \space input} = \dfrac{W_{out}}{E_{in}}.\]

    Table lists some efficiencies of mechanical devices and human activities. In a coal-fired power plant, for example, about 40% of the chemical energy in the coal becomes useful electrical energy. The other 60% transforms into other (perhaps less useful) energy forms, such as thermal energy, which is then released to the environment through combustion gases and cooling towers.

    Activity/device Efficiency (%)
    Cycling and climbing 20
    Swimming, surface 2
    Swimming, submerged 4
    Shoveling 3
    Weightlifting 9
    Steam engine 17
    Gasoline engine 30
    Diesel engine 35
    Nuclear power plant 35
    Coal power plant 42
    Electric motor 98
    Compact fluorescent light 20
    Gas heater (residential) 90
    Solar cell 10

    Efficiency of the Human Body and Mechanical Devices

    PhET Explorations: Masses and Springs

    A realistic mass and spring laboratory. Hang masses from springs and adjust the spring stiffness and damping. You can even slow time. Transport the lab to different planets. A chart shows the kinetic, potential, and thermal energies for each spring.

    Figure \(\PageIndex{2}\): Masses and Springs

    Summary

    • The law of conservation of energy states that the total energy is constant in any process. Energy may change in form or be transferred from one system to another, but the total remains the same.
    • When all forms of energy are considered, conservation of energy is written in equation form as \[KE_i + PE_i + W_{nc} + OE_i = KE_f + PE_f + OE_f ,\] where \(OE\) is all other forms of energy besides mechanical energy.
    • Commonly encountered forms of energy include electric energy, chemical energy, radiant energy, nuclear energy, and thermal energy.
    • Energy is often utilized to do work, but it is not possible to convert all the energy of a system to work.

    The efficiency \(E_{ff}\) of a machine or human is defined to be \(E_{ff} = \frac{W_{out}}{E_{in}},\) where \(W_{out}\) is useful work output and \(E_{in}\) s the energy consumed.

    Glossary

    law of conservation of energy
    the general law that total energy is constant in any process; energy may change in form or be transferred from one system to another, but the total remains the same
    electrical energy
    the energy carried by a flow of charge
    chemical energy
    the energy in a substance stored in the bonds between atoms and molecules that can be released in a chemical reaction
    radiant energy
    the energy carried by electromagnetic waves
    nuclear energy
    energy released by changes within atomic nuclei, such as the fusion of two light nuclei or the fission of a heavy nucleus
    thermal energy
    the energy within an object due to the random motion of its atoms and molecules that accounts for the object's temperature
    efficiency
    a measure of the effectiveness of the input of energy to do work; useful energy or work divided by the total input of energy

    Contributors

    Paul Peter Urone (Professor Emeritus at California State University, Sacramento) and Roger Hinrichs (State University of New York, College at Oswego) with Contributing Authors: Kim Dirks (University of Auckland) and Manjula Sharma (University of Sydney). This work is licensed by OpenStax University Physics under a Creative Commons Attribution License (by 4.0).