Skip to main content
Library homepage
 

Text Color

Text Size

 

Margin Size

 

Font Type

Enable Dyslexic Font
Physics LibreTexts

2: Lens and Mirror Calculations

( \newcommand{\kernel}{\mathrm{null}\,}\)

  • 2.1: Introduction to Lens and Mirror Calculations
  • 2.2: Limitations
    In this chapter, I am going to ignore lens and mirror aberrations. I may possibly prepare a separate chapter on lens and mirror aberrations sometime, but that is not the topic of the present chapter. Thus, in this chapter, I am going to assume that all angles are small.
  • 2.3: Real and Virtual
    Whereas you can project a real image on to a piece of card or a photographic film, you cannot do this with a virtual image. The reason that you can see a real image with your eye is that the additional optics of your eye bends the diverging light from the virtual image and makes it converge on to a real image on your retina.
  • 2.4: Convergence
    Converging light has positive convergence; Diverging light has negative convergence.
  • 2.5: Power
    The function of a lens is to change the convergence of a beam of light. Indeed the difference between the initial and final convergence is called the power P of the lens, or of a refracting interface, or of a reflecting mirror.
  • 2.6: Magnification
    If the magnification is positive, the image is erect; If the magnification is negative, the image is inverted.
  • 2.7: Examples
  • 2.8: Derivation of the Powers
    Up to this point I have defined what is meant by convergence, and I have defined power as the difference between the final and initial convergences. I asserted without proof formulas for the powers of a lens, a refracting interface, and a mirror. It is now time to derive them.
  • 2.9: Derivation of Magnification
  • 2.10: Designing an Achromatic Doublet
    A combination of two lenses in contact, a converging lens made of crown glass and a weaker diverging lens made of flint glass, can be designed so that the combination is a converging lens that is almost achromatic.
  • 2.11: Thick Lenses
  • 2.12: Principal Planes
  • 2.13: The Lazy Way
    The convergence and power method has great advantages when you have a complex systems of many lenses, mirrors and interfaces in succession. You just add the powers one after the other. But I expect there are some readers who don’t want to be bothered with all of that, and just want to do simple single-lens calculations with a simple formula that they are accustomed to, which is appropriate for the “real is positive” sign convention.
  • 2.14: Exercise

Thumbnail: Parallel rays coming into a parabolic mirror are focused at a point F. The vertex is V, and the axis of symmetry passes through V and F. For off-axis reflectors (with just the part of the paraboloid between the points P1 and P3), the receiver is still placed at the focus of the paraboloid, but it does not cast a shadow onto the reflector. (Public Domain).


This page titled 2: Lens and Mirror Calculations is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Jeremy Tatum via source content that was edited to the style and standards of the LibreTexts platform.

  • Was this article helpful?

Support Center

How can we help?